23
IP address: input IP(network) address. It could be a private or public network address. Check with your
Internet service provider or your private router setup.
DHCP: It is auto search IP function. When DHCP is enabled, you cannot modify IP/Subnet mask /Gateway.
These values are automatically assigned by the router through DHCP function. If DHCP is disabled,
IP/Subnet mask/Gateway values are displayed as “0”. You need to disable DHCP function to view current
IP information. When PPPoE is enabled, you cannot modify IP/Subnet mask /Gateway.
TCP port: Default value is 37777.
UDP port: Default value is 37778.
HTTP port: Default value is 80.
Max connection: system support maximum logged in 10 users. 0 means there is no connection limit.
Preferred DNS server: DNS server IP address.
Alternate DNS server: DNS server alternate address.
Transfer mode: Here you can select the priority between fluency/video qualities.
Latency - The system will put the real-time
Fluency - the system will
in higher priority when you select "Latency" which
means you may get frame loss when the network/Internet connection speed is slow for video stream
transfer because the DVR will try to maintain “real time” video speed at client end while sending video
files remotely.
protect the fluency and continuity of video stream
Network download: System will prioritize the process the downloading of data first if this function is enabled.
which means you may get
lagging issue when you have a slow network or Internet connection.
Advanced setting: Please refer to the
user’s manual
included in the resource CD for detail information.
After completing all the setup, please click save button to save settings. The system OSD menu will go back to
the previous OSD menu screen.
Figure 2-15
2.5
Pan/Tilt/Zoom
Please note:
Slight difference may be found in the user’s interface, due to various protocols.
Please make sure the speed dome RS485 data cables are properly connected to the A/B ports of DVR.
You have properly set PTZ information at the DVR settings.
Please switch camera monitor channel to current window.
