24
2.5.1
PTZ Setup
The pan/tilt/zoom setup includes the following steps. First, select camera channel. See Figure 2-16.
Protocol: Select corresponding PTZ protocol such as PELCOD.
Address: Input corresponding PTZ address.
Baud rate: Select baud rate.
Data bit: Select data bit. Default value is 8.
Stop bit: Select stop bit. Default value is 1.
Parity: There are three choices: none/odd/even. Default value is none.
After completing all the setup, please click save button, the system will go back to the previous OSD menu.
Figure 2-16
2.5.2
PTZ Operation
In one window display mode, right click mouse (click “Fn” Button in the front panel or click “Fn” key in the
remote control). The interface is shown as in Figure 2-17.
Click Pan/Tilt/Zoom, the interface is shown as below. See
Error! Reference source not found.
.
Here you can set the following items:
Step: value ranges from 1 to 8.
Zoom
Focus
Iris
Click icon
and
to adjust zoom, focus and iris.
Name
Function
key
Function
Shortcut key Function
key
function
Shortcut
Key
Zoom
Near
►
Far
Focus
Near
Far
►
Iris
close
Open
Figure 2-17
Figure 2-18
