4
Camera scans back and forth regularly in a horizontal field. Here you need to set left and right
limit and scan speed. You can set 5 scanning paths.
1.2.7 Auto Pattern
Memorize dome operation such as pan, tilt, and zoom to repeat. Focus and iris are in auto mode
during auto pattern. For each pattern, the time should be less than 60 seconds. You can set 5
pattern paths.
1.2.8 Auto Touring
Add addresses into a routine in a desired order and then set time and stop duration for each
address. The dome will begin an auto touring between these addresses. You can set 8 touring
paths.
1.2.9 Auto Flip
As long as you continue to hold the keyboard joystick in the down position, the dome rotates 180
degrees and repositions itself for uninterrupted viewing of any subjects that passes directly
beneath the dome.
1.2.10 Self-diagnosis
There is a self diagnosis procedure when dome boots up.
Tilt and vertical engine check
Camera diagnostics
Display dome information and diagnosis information such as address, protocol, baud
rate, type.
1.2.11 Day/Night Mode (B/W & Color Mode)
System supports auto/manual switch in low illumination.
In the auto mode, the camera can automatically switch the CCD level according to the light
change. In the manual mode, it can use the menu or the button to realize the color display, black
and white display,
1.2.12 Auto Focus
Auto focus allows the lens to remain in focus during zoom-in, zoom-out and motion functions to
get vivid image. You can use FAR or NEAR button to adjust focus manually.
1.2.13 Backlight Compensation
Balance the brightest and darkest sections of a scene to make a more vivid picture.
1.2.14 Pan Tilt and Zoom
Supports zoom in and zoom out during tilt and pan movement.
In this period focus and iris are both in auto mode to get vivid image.
1.2.15 3D Intelligent Location
Working with DVR, just click part of the current scene will be displayed in the central window and
automatically zooms. All of these allow you to trace precisely.
