18
o
Manual: It becomes valid after you set the gain setting, shutter, iris setting, wide
dynamic region (WDR).
o
IRIS PRIO
: It becomes valid after you set the exposure setting, iris setting, wide
dynamic region (WDR).
o
SHUT PRIO
: It becomes valid after you set the shutter setting, exposure
compensation, wide dynamic region (WDR).
GAIN SETTING: The value ranges from 1 to 16. Default value is 2. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
SHUTTER: You can set shutter speed here. The value ranges from
1/3 to 1/10000
. Default
value is 1/50.
Please use the left/right button on the keyboard or in the speed dome terminal
menu to set.
IRIS SETTING: The value ranges from 1 to 18. Default value is 11. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
EXPOSURE COM: The value ranges from 1 to 15. Default value is 8. Please use the
left/right button on the keyboard or in the speed dome terminal menu to set.
SLOW AE: in the strong light environment, you can lower the camera exposure speed to
capture the image and enhance the definition. The value ranges from 1 to 16. The bigger the
value, the higher the exposure speed. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set.
Please make sure your camera supports this
function.
SLOW SHUTTER: In lower illumination environment, you can lower the cameras auto
exposure time to capture the image and enhance the definition.
Please note for the
moving object, the image trail phenomenon may occur.
Please use the left/right button
on the keyboard or in the speed dome terminal menu to set.
WDR ENBALE: It is an abbreviation for wide dynamic region. Please make sure your
camera supports current function. This function can adjust the video brightness when the
contrast between the strong light and the dark light is too high. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
NEXT PAGE: To set BLC, GAIN LIMIT, SLOW SHUTTER LIMIT, NOISE REDUCTION, 3D
NOISE REDUCTION, BACK ,EXITand etc. Click OK button to display the above items.
BACK: Go back to previous menu.
EXIT: Log out system menu.
4.2.3.2
Next Page
BLC: Adjust brightness of the camera, the lens will auto compensate light to the object
which in the dark. Please use the left/right button on the keyboard or in the speed dome
terminal menu to set.
Gain Limit: set the gain maximum limit. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set.
BLC :OFF (ON/OFF)
GAIN LIMIT :08 (01~12)
SLOW SHUTTER LIMIT :1/12
NOISE REDUCTION :03 (OFF~05)
3D NOISE REDUCTION :OFF (OFF~02)
BACK
EXIT
