- 7 -
Connect Diffusor
Installation Procedures
•
Drill one Ø7/16-inch hole into ice maker close to and above the
water reservoir. Install grommet provided into hole.
•
Attach one end of the supplied tubing to the ozone outlet of the
Sanit-ICE
®
.
•
Run tubing through grommet installed in ice maker. Attach the
opposite end of the tubing to the barbed fitting of the diffuser
provided and place the diffuser into the water reservoir.
•
Plug the Sanit-ICE
®
System into a GFCI protected outlet.
Feature Callout
Figure 1
Typical Installation
Figure 2
Ø7/16” Hole
for grommet
Sump Water Line
Sanit-ICE
®
System:
•
No more than 10 ft from
ice maker
•
Above sump water line
•
Not using an extension
cord
Ozone Outlet
LED Indicator
Z-Bar Mounting
Cooling Fan
Mode Select Button
