- 6 -
I
NSTALLATION
P
ROCEDURES
Clean Ice Maker
Clean your ice maker to industry standards. The Sanit-ICE
®
System is
designed to keep a clean ice maker from becoming dirty. It will
sterilize a dirty ice maker, but it will still appear dirty.
Unpacking
Make sure all of the components are in the box before beginning
installation of the Sanit-ICE
®
System. In addition to this manual, you
should have (1) Sanit-ICE
®
unit, (1) z-bar mount, (10ft) tube, (1)
rubber grommet, and (1) diffusor.
Locate a Mounting Location
Before beginning the installation, locate a suitable location for the
Sanit-ICE
®
System. Find a flat portion of a wall, close to the ice maker.
The unit may also be placed on a flat, level surface. Please consider
the following when selecting a mounting location:
•
Never install the Sanit-ICE
®
System in an area where water may
freeze. Freezing water will damage the internal components.
•
The Sanit-ICE
®
System is mounted horizontally. Refer to the
installation instructions. Do not mount vertically or at an angle.
Always use a level when installing this unit.
•
The Sanit-ICE
®
System is close enough to a power outlet so an
extension cord is not necessary.
•
The Sanit-ICE
®
System is to be mounted no further than 10 feet
from the point of use.
•
Mount the Sanit-ICE System above the entry point of the ozone
line into the ice machine.
Mount the Sanit-ICE
®
System
•
Use the appropriate tools and mounting hardware (not provided)
for the material the wall is constructed from and install the z-bar.
Use a level to make sure it is horizontal.
•
Place the Sanit-ICE
®
System onto the z-bar.
