- 8 -
O
PERATING
I
NSTRUCTIONS
Once installed, the Sanit-ICE
®
System is ready to use. Simply
press the mode select button to cycle through different flow profiles.
Use the chart below to choose the appropriate profile based off your
ice maker’s 24-hour ice yield and the conditions of your facility.
The Sanit-ICE
®
System’s LED indicator light stays illuminated,
letting you know the unit is operating normally and in standby mode
waiting for the next ozone cycle. When the integrated timer triggers,
the Sanit-ICE
®
System will automatically turn on the internal pump.
The indicator LED will blink indicating that ozone is flowing through
the system. The timer is tied to a programmed universal clock that
starts when the unit is plugged in and cycles every ten minutes. Ozone
is only produced at the beginning of a cycle for a time period based on
your profile, and the unit must reach a new cycle before ozone is
produced again.
In the event of power loss, the Sanit-ICE
®
System will remember
what profile it was set at, and resume function when it receives power
again. If the system is turned off in the middle of producing ozone or
once a cycle completes, the Sanit-ICE
®
System will leave the pump
and fan on for approximately 10 seconds to purge ozone from the
system and cool down the ozone generator.
Summary of LED Indicators
Figure 3
Light
Color
24 Hour Ice
Yield, Normal
Environment
24 Hour Ice
Yield, Extreme
Environment*
Air
flow
(SCFH)
Repeatin
g
Runtime
(Minutes)
Off
Off
Yellow
<400 lbs
n/a
0.5
1 On / 9 Off
Green
400-600 lbs
<400 lbs
1.0
2 On / 8 Off
Blue
600-1000 lbs
400-600 lbs
1.5
4 On / 6 Off
Purple
1000+ lbs
600+ lbs
2.0
7 On / 3 Off
Red
Service Required
*Examples of extreme operating environments include bakery operations, bar and taverns,
microbreweries, etc.
