Optimus 42-4041 Owner'S Manual Download | Manualshive

Page: 7 / 60

background image

7

PREPARATION

Note: To connect a MIDI device, see
“Making the MIDI Connections” on
Page 41. To connect a sustain pedal,
see “Using a Sustain Pedal” on
Page 31.

CONNECTING POWER

You can power your MD-1200 from ei-
ther:

• internal batteries (see “Using Batter-

ies”)

• standard AC power using an

optional AC adapter (see “Using AC
Power” on Page 8)

Notes:

• Connecting an AC adapter automat-

ically disconnects internal batteries.

• Always disconnect the adapter

when you finish using the MD-1200.

• Disconnecting the keyboard’s power

clears the control settings, memory
contents, and user tones (see
“Using the Custom Tone Synthe-
sizer” on Page 24 and “Using the
Memory” on Page 32).

Using Batteries

Your MD-1200 can use six D batteries
(not supplied) for power. For the best
performance and longest life, we recom-
mend RadioShack alkaline batteries.

Cautions:

• Use only fresh batteries of the

required size and recommended
type.

• If you do not plan to use the MD-

1200 with batteries for a week or
more, or if you will be using only AC
power, remove the batteries.

• Do not mix old and new batteries,

different types of batteries (stan-
dard, alkaline, or rechargeable), or
rechargeable batteries of different
capacities.

1. Press the tabs on the battery com-

partment cover, then pull up to
remove the cover.

2. Put the batteries in the compartment

as indicated by the polarity symbols
(+ and –) marked beside the com-
partment.

3. Replace the cover.

If the MD-1200 sounds weak or does not
work properly, replace all six batteries.

Warning: Dispose of old batteries
promptly and properly. Do not burn or
bury them.

Caution: Always remove old or weak
batteries; batteries can leak chemicals
that can destroy electronic parts.

42-4041.fm Page 7 Tuesday, August 3, 1999 6:56 AM

«
...
5
6
7
8
9
...
»

Summary of Contents for 42-4041





























































Reviews:

No comments

Related manuals for 42-4041

Brand: Fatar Pages: 3

Brand: Jabra Pages: 10

Brand: A-Champs Pages: 19

Brand: BH FITNESS Pages: 68

Brand: Axxess Pages: 8

Brand: Bticino Pages: 14

Brand: M-Audio Pages: 80

MagicWatch MWE850

Brand: Waeco Pages: 200

Brand: iPazzPort Pages: 5

Brand: Discount Car Stereo Pages: 5

Brand: Sandberg Pages: 4

Brand: Techly Pages: 2

Brand: enika Pages: 2

Brand: Franklin Pages: 12

Brand: Genesis Pages: 8

Brand: Genesis Pages: 12

Riverside Jump pack

Brand: S&M Pages: 8

Brand: Shun Bao Technology Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands