OPTIMUM
M A S C H I N E N - G E R M A N Y
201
2
Operation
Version 1.0.1 dated 30 / 08 / 2012
Page 33
Original operating instructions
MH28V
GB
4.11
Manual spindle sleeve feed with the spindle sleeve lever
ATTENTION!
The clutch of the fine feed has to be disengaged before the spindle sleeve lever can
be used. Activating the spindle sleeve lever when the fine feed is engaged may
damage the clutch.
Loosen the handle screw (
„Fine feed“ on page 31) .
The spindle sleeve lever moves away from the drill-mill head and disengages the clutch
of the fine feed.
4.12
Swivelling the drill-mill head
The drill-mill head may be swivelled to
the right and to the left. Two screw-
ings need to be loosened.
Fig.4-9:
Clamping screws
CAUTION!
If the screws are completely unfastened, the milling head might fall down.
When slewing the working head, only unfasten the screws as far as necessary to be
able to perform the settings. After having set the slewing angle, retighten the fixing
screws.
Clamping screws
