OPTIMUM
M A S C H I N E N - G E R M A N Y
20
12
Maintenance
Version 1.0.1 dated 30 / 08 / 2012
Page 38
Original operating instructions
MH28V
GB
INFORMATION!
The spindle bearing arrangement is continuously lubricated. It is not required to relubricate it.
Ever
y six m
o
nths
Gear dril
l-mill he
ad
Greasing
Turn the drill-mill head as described under
“Swivelling
the drill-mill head“ on page 33 completely by 90° to the
right.
Check if the clamping screws are firmly tightened as
described under
“Swivelling the drill-mill head“ on
page 33 and that the drill-mill head can not independ-
ently tilt.
Disassemble the cover plate at the rear.
Grease the toothed wheels.
“Operating material“ on
page 17
Fig.5-5: Rear
Every si
x
months
S
p
indle
a
nd spin
dle nu
t Z-a
x
is
Greasing
Open the plug.
Crank the milling head into the suitable height.
Oil or grease the spindle nut and spindle.
Fig.5-6: Column
Interval
Where?
What?
How?
Cover
Plug
