//
7
O P T I M U M
N U T R I F O R C E 2 . 0 E X T R A C T O R
U S I N G T H E G R I N D I N G C U P
1
Place the required amount of dry ingredients into the grinding cup. Do not exceed the maximum
capacity of the grinding cup, which is 120g.
2
Place the grinder blades base onto the grinding cup (blades
down) and rotate clockwise until tight.
3
Plug the Nutriforce 2.0 Extractor into a power outlet, then press the ON/OFF button.
4
When you press the LOW/HIGH button either "L" or "H" will show on the display. If "L" is shown
and you wait 3 seconds the blender will start blending at LOW speed. If "H" is shown after 3
seconds it will blend at HIGH speed. Press the ON/OFF button to stop blending. To resume
blending press the LOW/HIGH button as desired.
5
Press and release the PULSE button to pulse at high speed. If you want to pulse more, press
and release the button again.
6
After 60 seconds of continuous operation, the Nutriforce 2.0 Extractor will stop automatically. It
needs to rest for 5 minutes to prevent overheating. After 5 cycles of operation/rest, let it cool
down completely.
Notice:
Do not use the Nutriforce 2.0 Extractor for grinding ingredients for more than 60 seconds at a time.
Wait 5 minutes before using it again.
To remove the grinding cup/blade base from the main base, hold both parts firmly and rotate
counterclockwise.
To remove the grinding cup from the blade base, hold both parts firmly and rotate counterclockwise
to access the ingredients.
When you are done blending, unplug the power cord from the outlet.
