//
5
O P T I M U M
N U T R I F O R C E 2 . 0 E X T R A C T O R
U S I N G Y O U R O P T I M U M N U T R I F O R C E 2 . 0 E X T R A C T O R
1
Place the food into the blending cup. Then place the
extractor blade base onto the cup (blades down) and rotate
clockwise until tight.
Note:
Do not put food exceeding the blender's maximum
capacity of 800ml.
Make sure the blade base and the blending cup are
closed tightly, otherwise the blender will leak.
Always cut hard food into small pieces.
2
Place the assembled blade base and blending cup onto the
main base and rotate clockwise until tight. You will hear a
sound once secured.
Note:
There is a safety switch (A) on the base that will prevent the
blender from functioning if the base blade/blending cup is
not secured properly.
Do not prevent the functioning of the safety switch or you
risk damaging the blender.
3
If using a preset program, select the program that best
suits your recipe. The preset feature will automatically stop
the unit at the end of the program. To pause the unit at any
time, press the on/off button. Reference page 6 for program
descriptions.
4
To remove the cup, ensure that the motor has
stopped running. Then turn the cup counterclockwise and
pull straight up to remove.
5
4
Turn the cup upright and remove the Nutriforce Extractor Blades Assembly by twisting the Pro
Extractor Blades Assembly counterclockwise. Be sure to store the Extractor Blades Assembly
attached to an empty cup when not in use.
6
7
8
Twist the Sip & Seal lid onto the cup to enjoy your drink on the go. Press flip top cap firmly into
the opening to get the best seal. The flip-top cap locks open when pressed backwards.
Make sure that the motor base is unplugged when not in use.
To remove the motor base unit, tip the unit forward from the rear to easily disengage the suction
cups.
A
A
