6
//
O P T I M U M
N U T R I F O R C E 2 . 0 E X T R A C T O R
N U T R I F O R C E 2 . 0 P R O G R A M S
MANUAL SETTINGS:
ON/OFF
Press once to start running, press again to stop.
LOW/HIGH
When you press the LOW/HIGH button either "L" or "H" will show on the display. If "L" is shown and you wait 3
seconds the blender will start blending at LOW speed. If "H" is shown after 3 seconds it will blend at HIGH speed.
Press the ON/OFF button to stop blending. To resume blending press the LOW/HIGH button as desired.
SMART/POWER
SMART : Working time is 45s
POWER : Working time is 60s
When you press the SMART/POWER button either "45" or "60" will show on the display. If "45" is shown and you
wait 3 seconds the blender will start blending for 45 seconds. If "60" is shown after 3 seconds it will blend for 60
seconds. Press the ON/OFF button to stop blending. To resume blending press the SMART/POWER button as
desired.
The smart and power blend are pre-set functions especially useful for making smoothies.
The speed fluctuates for the best outcome.
PULSE
Runs only while pressed down. Short presses make short pulses.
Timer counts up by seconds as long as pressed down.
Maximum time 60s
Notice:
Do not use the Nutriforce 2.0 for more than 60 seconds at a time. Wait 5 minutes before using it again.
To remove the blending cup/blade base from the main base, hold both parts firmly and rotate
counterclockwise.
To remove the blending cup from the blade base, hold both parts firmly and rotate counterclockwise
to access the ingredients.
When you are done blending, unplug the power cord from the outlet.
Do not put food exceeding the blender's maximum capacity of 800ml.
Make sure the blade base and the blending cup are closed tightly, otherwise the blender will leak.
Always cut hard food into small pieces.
