2
014
US
Page 26
Geared drill
B50 GSM
Version 1.0.3
22 / 07 / 2014
Handling
OPTIMUM
M A S C H I N E N - G E R M A N Y
Fig.4-2: Table height adjustment
4.2.1
Control panel
Fig.4-3: Control elements on the control panel
Mode of operation selector switch
With the selector switch the mode of operation is selected „drilling or thread cutting“.
Mode of operation drilling
The auxiliary function of the micro switches in the drilling depth to change the direction of rota-
tion change is deactivated.
Mode of operation thread cutting
The function of the micro switches in the drilling depth and the function of the direction of rota-
tion change by the push-button actuators in the guide lever are activated.
Clamping lever for table rota-
tion and height
Table height adjustment
Gear selector
Speed table
Coolant pump ON/OFF
Motor speed switch
Selector switch
Drilling/Threading
Mode of operation selector
switch
Change over switch
„ON“ push button
„OFF“ push button
Gear selector
Operation control light
Machine lighting ON/OFF
Push-button spindle feed and
direction of rotation change
Scale for drill depth
Handwheel for spindle feed
EMERGENCY stop button
