201
4
US
Page 11
22 / 07 / 2014
Version 1.0.3
B50 GSM
Geared drill
OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
WARNING!
If you bypass, remove or override a safety device in any other way, you are endangering
yourself and other personnel working with the geared drill. The possible consequences
are
•
damage or injuries as a result of components or parts of components flying off at high
speed,
•
contact with rotating parts,
•
fatal electrocution.
The geared drill includes the following safety devices:
EMERGENCY stop button.
Main lockable switch.
A drilling table with T-slots to fasten the work piece or a vise.
Adjustable drill chuck guard with position switch.
WARNING!
The separating protective equipment which is made available and delivered together with
the machine is designed to reduce the risk of workpieces or fractions of them which
being expelled, but not to remove them completely.
1.7.1
EMERGENCY- STOP button
CAUTION!
After actuating the EMERGENCY-STOP-
button the drilling spindle will turn
some more seconds depending on the
previously set speed.
Fig. 1-1: EMERGENCY-STOP button
1.7.2
Main switch
In the "0" position, the lockable switch can
be protected with a padlock against unau-
thorised or accidental activation.
When the main switch is off, the power
supply to the motor is cut off.
Fig. 1-2: Main switch
Points marked with the pictogram shown here are not included. These points may be live even
when the main switch is off.
EMERGENCY-STOP
button
Main switch
