2014
US
Page 8
Geared drill
B50 GSM
Version 1.0.3
22 / 07 / 2014
Safety
OPTIMUM
M A S C H I N E N - G E R M A N Y
1.2
Proper use
WARNING!
Improper use of the machine
•
will endanger personnel,
•
will endanger the machine and other items used by the operator,
may affect proper operation of the machine.
The geared drill is designed and manufactured for boring cold metals or other non-flammable
materials that do constitute a health hazard. It uses a rotating cutting tool with several cutting
edges.
The geared drill must only be used with keyless drill chuck.
Chucks that require a key to secure the bit must not be used on this geared drill.
If the geared drill is used in any way other than described above, or modified without authoriza-
tion, then the geared drill- is being used improperly.
We do not take liability for damage caused by improper use.
We would like to stress that any modifications to the construction, or technical or technological
modifications that have not been authorized will also render the warranty null and void.
It is also part of proper use that
the limits of the geared drill are complied with,
the instruction manual is observed,
review and maintenance instructions are observed.
WARNING!
Very serious injury.
It is forbidden to make any modifications or alterations to the operating values of the gea-
red drill! These could endanger personnel and cause damage to the geared drill.
1.3
Possible dangers caused by the geared drill
The geared drill is carried out with the latest technological advances.
Nonetheless, there remains a residual risk, since the geared drill operates with
high revolutions,
rotating parts,
electrical voltage and currents.
We have used construction resources and safety techniques to minimise the health risk to per-
sonnel resulting from these hazards.
If the geared drill is used by personnel who are not duly qualified, there may be a risk resulting
from incorrect operation or unsuitable maintenance.
INFORMATION
All personnel involved in assembly, commissioning, operation and maintenance must
be duly qualified,
follow this instruction manual.
In the event of improper use
there may be a risk to personnel,
there may be a risk to machine and other items,
