201
4
US
Page 15
22 / 07 / 2014
Version 1.0.3
B50 GSM
Geared drill
OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
1.11.3
Mechanical maintenance work
Remove all protection and safety devices before starting any maintenance work and re-install
them once the work has been completed. This includes:
covers,
safety indications and warning signs,
earth (ground) connection.
If you remove protection or safety devices, refit them immediately after completing the work.
Check if they are working properly!
1.12
Electrical system
Have the machine and/or the electrical equipment checked regularly, and at least every six mon-
ths.
Eliminate immediately all defects such as loose connections, defective wires, etc.
A second person must be present during work on live components, to disconnect the power in
the event of an emergency.
Disconnect the geared drill immediately if there are any problems in the power supply!
