Maintenance
Version 1.0 - 2020-12-22
150
Translation of original instruction
TU2506VB
EN
T
U
2506V
B_GB
_5.
fm
5
Maintenance
In this chapter you will find important information about
Inspection
Maintenance
Repair
of the lathe.
ATTENTION!
Properly performed regular maintenance is an essential prerequisite for
operational safety,
failure-free operation,
long durability of the lathe and
the quality of the products which you manufacture.
Installations and equipment from other manufacturers must also be in good order and condition.
5.1
Safety
WARNING!
The consequences of incorrect maintenance and repair work may include:
extremely serious injuries to those working on the lathe and
damage to the lathe.
Only qualified personnel should carry out maintenance and repair work on the lathe.
Electrical systems and operating materials may only be installed, modified and repaired
by a trained electrician or supervised and under the control of a trained electrician and
must comply with electrotechnical regulations.
WARNING!
Do not climb onto or into the machine while working.
5.1.1
Preparation
WARNING!
Only work on the lathe when the power plug of the lathe has been disconnected.
Attach a warning label.
5.1.2
Restarting
Before restarting, run a safety check.
WARNING!
Before starting the lathe, you must check that there is no danger for persons and that
the lathe is not damaged.
5.1.3
Cleaning
CAUTION!
Use a chip hook for removal of chips and wear suitable protective gloves.
