Safety
Version 1.0 - 2020-12-22
94
Translation of original instruction
TU2506VB
EN
T
U
2506V
B_GB
_1.
fm
1.9.3
Lathe chuck protection with position switch
The lathe is equipped with a lathe chuck protection. The spindle of the lathe can only be
switched on if the lathe chuck protection is closed.
Img.1-3:
Lathe chuck protection
1.10
Safety check
Check all safety devices
when starting any work,
once a week,
after all maintenance and repair work.
INFORMATION
Use the following summary to perform the checks.
Lathe chuck protection
General check
Equipment
Check
OK
Guards
Mounted, firmly bolted and not damaged
Signs,
Markers
Installed and legible
Functional check
Equipment
Check
OK
Emergency-stop
push button
After activating the emergency stop mushroom button, the control voltage on
the lathe will shut off. The spindle continues to rotate for a while, depending on
the mass moment of inertia of the spindle and workpiece.
Positions switch of lathe
chuck protection
The spindle drive of the lathe must only be switch on if the lathe chuck
protection is closed.
Switch on the protective
cover in the headstock
The spindle drive of the lathe must only be switch on if the protective cover of
the headstock is closed.
