OPTIMUM
M A S C H I N E N - G E R M A N Y
Assembly and commissioning
Version 1.0.1 dated 2016-02-23
Page 30
Original operating instructions
MZ4
│
MZ4V
GB
3.5.2
Anchored mounting
Use an anchored mounting to achieve a rigid connection to the substructure. An anchored
mounting is always appropriate if the intention is to machine large parts up to the maximum
capacity of the drilling-milling machine.
The milling machine is fastened to the floor with four anchor screws DIN 529 M20 x 200 through
the machine foot. The anchor screws are included in the delivery.
The dimensions of the anchor screws are shown in the following drawing.
Img.3-2: Foundation plan
Drilled core holes with a diameter of 120 to 150mm and a depth of 200mm are provided in
the foundation.
Raise the machine from the floor and centre in the inner drill holes with the anchor screws.
Roughly align the machine.
Fill the drill holes with concrete and allow to set.
680
580
84
5
75
0
