Version 1.0.4 - 2020-07-28
33
Translation of original instruction
MH22V
│
MH22VD
EN
MH
22
V_MH2
2
VD_G
B_4.
fm
4.13
Swivelling the milling head
The milling head can be swivelled to the right and to the left.
Loosen the fastening screw on the milling head.
Turn the drill-mill head to the desired position.
Retighten the fastening screw.
INFORMATION
The milling head should be aligned after resetting to the initial position with a dial indicator so
that holes can be produced with the spindle sleeve at a right angle.
Set the zero degree angle step using your set-up.
Img.4-3:
Swivelling the milling head
A
B
Zero degree angle step
Clamping screw
