Version 1.0.4 - 2020-07-28
40
Translation of original instruction
MH22V
│
MH22VD
EN
MH
22
V_MH2
2
VD_G
B_5.
fm
Sp
in
dl
e nu
t
M
ill
in
g tab
le
Reset
X axis
Increased play in the milling table spindles can be reduced by
resetting the spindle nuts. The spindle nuts are reset by reduc-
ing the thread flanks of the spindle nut by means of take-up
screws. After the reset, it is necessary to check if there is still
smooth movement over the entire path, otherwise wear is con-
siderably increased due to friction between the spindle nut and
the spindle.
Img.5-3:
Milling table
Sp
in
dl
e nu
t
Milling table
Reset
Y axis
Img.5-4:
Milling table
When necessary
Gi
bs
Milling table
Reset
X axis
Y axis
Loosen one screw, turn the other adjustment screw of the
gib clockwise. The gib is pushed further inward thus reduc-
ing the play in the guide rail.
Check the settings. The corresponding guide rail must be
more easily movable but ensure stable guidance.
Img.5-5:
X axis / Y axis adjustment screws
Interval
Where?
What?
How?
Take-up screws
Take-up screws
V-ledge
Adjustment screw
