Optimum 3034252, Operating Manual, Page: 14 / 84

Safety
Version 1.0.2 - 2020-07-06 14 Translation of original instruction
DH35V EN
DH
35
V
_
G
B
_
1.f
m

after all maintenance and repair work.
Check that prohibition, warning and information signs and the labels on the geared drill

are legible (clean them, if necessary)

are complete (replace if necessary).
INFORMATION
Organise the checks according to the following table;
1.11 Emergency-stop switch
ATTENTION!
The drilling spindle keeps turning for a short time even after actuating the emergency
stop push button depending on the preset speed.
Img. 1-2: Emergency-stop
1.11.1 Master switch
WARNING!
Dangerous voltage even if the main switch is switched off.
General check
Equipment Check OK
Guards Mounted, firmly bolted and not damaged
Signs,

Markers
Installed and legible
Date: Checked by (signature):
Functional check
Equipment Check OK
Emergency-stop switch After actuating the emergency stop push button the geared
drill must be switched off.
Drill chuck guard The geared drill can only be switched on if the drill chuck
guard is closed. The engine must switch off when the drill
chuck guard is opened during operation.
Date: Checked by (signature):
Emergency-stop
switch