Safety
Version 2.1.2 dated 2018-09-13
Page 14
Translation of the original instructions
B17Pro | B23Pro | B26Pro | B33Pro
GB
B17_
B23_
B26_
B33_
GB_
1
.f
m
OPTIMUM
M A S C H I N E N - G E R M A N Y
®
If a safety device has been activated or has failed, the drilling machine must only be used if you
the cause of the fault has been eliminated,
have verified that there is no danger resulting for the personnel or objects.
WARNING!
If you bypass, remove or deactivate a safety device in any other way, you are
endangering yourself and other personnel working with the drilling machine. The
possible consequences are:
injuries due to components or parts of components flying off at high speed,
contact with rotating parts,
fatal electrocution,
The drilling machine machine includes the following safety devices:
an EMERGENCY STOP push button,
a protective cover of the pulleys with positioning switch,
a drill chuck protection with positioning switch,
a drilling table with T-slots to fix the workpiece or a vice.
WARNING!
The separating protective equipment which is made available and delivered together
with the machine is designed to reduce the risk of workpieces or fractions of them which
being expelled, but not to remove them completely. Always work carefully and observe
the limits of their machining process.
1.9
EMERGENCY-STOP push button
ATTENTION!
Also after actuating the EMERGENCY-
STOP switch, the drilling spindle is
turning - depending on the previously
selected speed - for a few seconds
more.
Img.1-1:
EMERGENCY-STOP push button
1.10
Separating protective devices
1.10.1 Covering cap of the pulley
A covering cap for the pulleys is mounted
on the drilling head.
A switch is integrated in the protective
cover which monitors that the closed
position.
INFORMATION
EMERGENCY-
STOP button
Protective cover
