OPTIMUM Maschinen OPTI drill B 17Pro Operating Manual Download

Page: 28 / 81

Assembly

Version 2.1.2 2018-09-13

Page 28

Translation of the original instructions

B17Pro | B23Pro | B26Pro | B33Pro

B17_

B23_

B26_

B33_

GB_

OPTIMUM

M A S C H I N E N - G E R M A N Y

B33Pro, B33Pro Vario

Img.3-13: Fixing of foot B33Pro

3.5

First commissioning

ATTENTION!

Before initially operating the machine, check all screws, fixtures and/or safety devices
and tighten up the screws if necessary!

WARNING!

Risk from using improper workpiece clamping materials or operating the machine at an
inadmissible speed.

Only use the clamping materials (e.g. drill chuck) which had been delivered together with
the machine or as optional equipment offered by OPTIMUM.

Only use tool clamping devices in the intended admissible speed range.

Workpiece clamping materials must only be modified according to the recommendations
of OPTIMUM or of the clamping material manufacturer.

WARNING!

When first commissioning the drilling machine by inexperienced personnel you
endanger people, the machine and the equipment.

We do not accept any liability for damages caused by incorrectly performed
commissioning.

380

12,80

450

Summary of Contents for OPTI drill B 17Pro


















































































Search results

Summary of Contents for OPTI drill B 17Pro

Reviews:

Related manuals for OPTI drill B 17Pro

Brands by name

Popular brands

OPTIMUM Maschinen OPTI drill B 17Pro, Operating Manual

Search results

Summary of Contents for OPTI drill B 17Pro

Reviews:

Related manuals for OPTI drill B 17Pro

Brands by name

Popular brands