Safety
Version 2.1.2 dated 2018-09-13
Page 12
Translation of the original instructions
B17Pro | B23Pro | B26Pro | B33Pro
GB
B17_
B23_
B26_
B33_
GB_
1
.f
m
OPTIMUM
M A S C H I N E N - G E R M A N Y
®
1.5
Qualification of personnel
1.5.1
Target group
This manual is addressed to
the operating companies,
the operators,
the maintenance personnel.
Therefore, the warning notes refer to both, operation and maintenance personnel of the drilling
machine.
Determine clearly and explicitly who will be responsible for the different activities on the
machine (operation, maintenance and repair).
Unclear responsibilities constitute a safety risk!
Always disconnect plug of the drilling machine from the electrical power supply. This will pre-
vent it from being used by unauthorized persons.
Operator
The operator has been instructed by the operating company regarding the assigned tasks and
possible risks in case of improper behaviour. Any tasks which need to be performed beyond the
operation in standard mode must only be performed by the operator, if so indicated in these
instructions and if the operator has been expressively commissioned by the operating com-
pany.
Qualified electrician
With professional training, knowledge and experience as well as knowledge of respective
standards and regulations, qualified electricians are able to perform work on the electrical sys-
tem and recognise and avoid any possible dangers.
Qualified electricians have been specially trained for the working environment, in which they are
working and know the relevant standards and regulations.
Qualified personnel
Thanks to professional training, knowledge and experience as well as knowledge of relevant
regulations the qualified personnel is able to perform the assigned tasks and to independently
recognise and avoid any possible dangers themselves.
Instructed person
Instructed persons were instructed by the operating company regarding the assigned tasks and
any possible risks of improper behaviour.
1.5.2
Authorized personnel
WARNING!
Inappropriate operation and maintenance of the drilling machine constitutes a danger for
the personnel, objects and the environment.
Only authorized staff may operate the drilling machine!
Persons authorized to operate and maintain should be trained technical personnel and
instructed by the ones who are working for the operating company and for the manufacturer.
The operating company must
Obligations of
the operating
company
train the personnel,
