Operation
Version 1.0.1 - 2020-08-10
17
Translation of original instruction
GU30S
EN
GU30S
_GB
.f
m
Img.4-2:
4.4
Replacing a grinding wheel
Included in delivery is a hand extractor for honing new grinding wheels, or for honing used
grinding wheels.
WARNING!
Grinding wheels must be replaced, if there is an excessive distance between the external
diameter of the grinding wheel and the completely readjusted workpiece support.
Disassemble the protective cover of the grinding wheel.
Loosen the shaft nut.
Hold the grinding wheel tight to loosen the nut. Make sure you use the correct direction to
loosen the nut.
Pull off the grinding wheel and the retaining washer from the shaft by hand.
8
7
7
