Delivery, interdepartmental transport and unpacking
Version 1.0.1 - 2020-08-10
14
Translation of original instruction
GU30S
EN
GU30S
_GB
.f
m
3.8
Overview of belt grinder on the GU30S
CAUTION!
If the protective cover is used as support surface (3), the workpiece can fly towards you
or the protective cover can be pressed onto the abrasive belt. Use extreme caution when
machining workpieces using this method.
DANGER!
Danger of clothing being drawn in.
To adjust the belt run (4) from the front operator side, it would be necessary to reach
over the grinding machine. Therefore, only adjust the belt run (4) of the belt grinder from
the rear of the grinder.
Img.3-2:
3.9
First commissioning
ATTENTION!
Before commissioning the machine, all bolts, fastenings and protections must be
checked and retightened as necessary!
CAUTION!
Danger from the use of unsuitable sanding belts. Only use abrasive belts with the correct
width and length.
WARNING!
First commissioned of the grinding machine by inexperienced personnel constitute a
risk to personnel and equipment.
(1) Workpiece stop surface
(2) Workpiece support surface
(3) Protective cover
(4) Knurled screw for belt run
1
4
3
2
