Version 1.0.1 - 2020-11-24
64
Translation of original instructions
DH40G | DH40GP
EN
D
H
40
G
_
D
H
4
0G
P
_G
B
_3
.f
m
3.5
Lifting the machine
Dismantle the side parts of the box.
Dismantle the fortifications in the box.
Tighten all clamping levers.
Attaching a lifting band as a load stop to the drill head and lifting the drilling machine.
3.6
Installation requirements
Organise the working area around the machine according to the local safety regulations. The
work area for operation, maintenance and repair must not be restrictive.
Follow the prescribed safety areas and escape routes according to VDE 0100 part 729 as
well as the environmental conditions for the operation of the machine.
The main switch of the machine must be freely accessible.
The machine must only be installed and operated in a dry and well-ventilated place.
Avoid places near machines generating chips or dust.
The installation site must be free from vibrations also at a distance of presses, planing
machines, etc.
Provide sufficient space for the personnel preparing and operating the machine and trans-
porting the material.
Also make sure the machine is accessible for setting and maintenance works.