manualshive.com logo in svg

Optima Centoris V480, User Manual

Share
Download
Optima Centoris V480 User Manual Download Page 83

BIOS Utilities

Advanced Menu 5 - 9

5

Local Bus IDE adapter: (Advanced Menu)

This item allows you to configure the IDE bus which controls the hard disk and op-
tical devices. It is set to “

Both

” by default.

Boot-time Diagnostic Screen: (Advanced Menu)

Use this menu item to enable/disable the Boot-time Diagnostic Screen.

Legacy USB Support: (Advanced Menu)

Use this menu item to enable/disable the support for Legacy Universal Serial Bus.

USB 2.0 Enable:

This menu item can be used to enable/disable support for USB 2.0.

POST Beep Sound (Advanced Menu)

Use this menu item to enable/disable the beep as the computer starts up.

Total Graphics Memory: (Advanced Menu)

Use this menu item to set the amount of system memory to be allocated for use by
the internal graphics device. The default memory size allocated is 

128MB, 

and this

may be adjusted to

 64MB 

or

 256MB 

(by pressing the spacebar to adjust) if required.

Summary of Contents for Centoris V480







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands