manualshive.com logo in svg

Optima Centoris V480, User Manual

Share
Download
Optima Centoris V480 User Manual Download Page 119

Modules & Options

Trusted Platform Module 7 - 19

7

TPM Module Driver Installation

1.

Insert the 

Device Drivers & Uti User’s Manual CD-ROM (Win 

Vista)

 into the CD/DVD drive.

2. Click 

Option Drivers

 (button).

3. Click 

4.Install TPM Driver > Yes

.

4. Click 

Next

.

5. Click the button to accept the license agreement, and then click 

Next

.

6. Click 

Next > Next > Install

.

7. Click 

Finish > Yes

 to restart the computer.

8. Run the application from the 

Infineon Security Platform Solution > Man-

age Security Platform

 item in the 

Start > Programs/All Programs menu

.

Password Warning

Do not lose the pass-
word. If you do so you
will be unable to make
administrative changes
unless you clear the
TPM. This could then re-
sult in data loss.

Summary of Contents for Centoris V480







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands