1
SAFETY PRECAUTIONS
For safe operation of the weighing indicator, please follow these
instructions:
●
Calibration inspection and maintenance of the indicator are prohibited by non-pro-
fessional staff
●
Please ensure that the indicator rests on a stable surface
●
The indicator is a piece of static sensitive equipment; Please cut off power during
electrical connections
●
Touching the internal components by hand is prohibited
●
DO NOT exceed the rated load limit of the unit
●
DO NOT step on the unit
●
DO NOT jump on the scale
●
DO NOT use this product if any of the components are cracked
●
DO NOT use for purposes other then weight taking
●
To avoid damaging the battery do not keep charger plugged in once battery is fully
charged
●
Make sure the weight is not over the Max capacity as it could damage the load cell
inside
● Material that has a static electric charge could influence the weighing. Discharge
the static electricity of the samples, if possible. Another solution to the problem is
to wipe both sides of the pan and the top of the case with an anti-static agent
Please take anti-static prevention measures
Any Accumulated charge on the body of the human operator should be discharged
first before opening the protective container with ESDS devices inside. The discharge
can be accomplished by:
●
Putting a hand on a grounded surface or, ideally, by wearing a grounded Anti-static
Wrist Strap and an Anti-static Mat
PREPARATION & SET UP
●
Plug into a wall outlet to avoid interference with other wirings
●
Turn on the indicator while there is no load
●
Calibration may be required before weighing when the scale is initially installed or
moved from a location
