ASE-C-MSA
User’s Manual
Page 5 of 10
Optilab, LLC
600 E. Camelback Road, Phoenix, AZ 85012
Phone: (602) 343-1496, Fax: (602) 343-1489, Email: [email protected]
+5V power socket
pin-out diagram
Listed below is the pin-out diagram for the +5V 4-pin power socket on the
external of the power a
dapter
:
RS-232
pin-out diagram
Listed below is the pin-out diagram for the RS-232 port on the external of the
power adapter
2.5
Operation Instructions
Start-up Procedure
1. Make sure the three optical output FC/APC connectors of the ASE module
are properly connected to the optical power receiver.
2. Connect the ASE module to the power adapter by using the 30-pin cable.
3. Connect the power adaptor to a +5 V DC power supply (depends on the
power adaptor the customer received, the Optilab PS-5-M power supply or a
typical coaxial +5 VDC AC/DC adaptor can be used) through DC power
socket.