Keratron
™
Piccolo Installation and operating manual
OPTIKON 2000
Fig. 3: The multifunction cable’s circular connector (A) and USB connector (B)
6.4 SOFTWARE INSTALLATION
6.4.1 INTRODUCTION
The Scout software does not require special instructions because it is driven by an
appropriate
Setup
program is usually installed when you receive the system.
The following precautions are recommended:
1. The PC must be an IBM compatible, with an operating system Windows
XP only with
USB2.0
interface.
2. The screen properties can be set in any mode, but it must be a “true color”
(65K or 16M colors). It is however recommended a screen size of at least
1024x768 pixels.
3. Do not alter any of the system files installed by the Scout Setup software,
nor any file in the Database unless you have a specific competence on the
PC and LAN management. If such is the case, refer to the Service Manual.
Updating the Scout software is easy and does not alter your database or the
instrument calibration or the user-defined settings that are stored on the hard disk.
You must first uninstall the previous version, and then install the updated version .
The most recent version can be downloaded, after you have registered, from Optikon
2000’s website:
http://www.optikon.com/
.
Cod. 161301EN
6-3
2012-01-17
Rev.D
