Button & Dial Descriptions
The below descriptions will describe the buttons and dials available on the controller.
1. White Balance Control
The White Balance Control section allows you to adjust the white balance settings of the camera.
a. [RESET R/B GAIN] Button
Press the [RESET R/B GAIN] button to reset the red & blue gain to default values.
b. [ONEPUSH TRIGGER] Button
Press the [ONEPUSH TRIGGER] button to calibrate the white balance of the room.
Note: Camera must be in OnePush White Balance in order for the OnePush Trigger to function.
c. [WHITE BALANCE CYCLE] Button
Press the [WHITE BALANCE CYCLE] button to cycle through the White Balance Modes.
Options include: Auto, Indoor, Outdoor, OnePush, & Manual.
d. [RED GAIN / BLUE GAIN] Knob
The [RED GAIN / BLUE GAIN] knob can be used to adjust the red & blue gain values.
2. Exposure Control
The Exposure Control section allows you to adjust the exposure settings of the camera.
a. [BACKLIGHT] Button
Press the [BACKLIGHT] button to toggle the camera’s backlight compensation.
b. [EXPOSURE CYCLE] Button
Press the [EXPOSURE CYCLE] button to cycle through the Exposure Modes.
Options include: Auto, Manual, Shutter Priority, Iris Priority, & Brightness Priority.
c. [IRIS / SHUTTER] Knob
The [IRIS / SHUTTER] knob allows you to adjust the Iris and Shutter values of the camera.
3. Speed Control Buttons
Use the Speed Control section to adjust the speeds the joystick controls the camera(s).
a. [TILT SPEED UP / DOWN] Buttons
Press the [TILT SPEED UP / DOWN] buttons to adjust the camera tilt speed.
b. [PAN SPEED UP / DOWN] Buttons
Press the [PAN SPEED UP / DOWN] buttons to adjust the camera pan speed.
c. [ZOOM SPEED UP / DOWN] Buttons
Press the [ZOOM SPEED UP / DOWN] buttons to adjust the camera zoom speed.
d. [FOCUS SPEED UP / DOWN] Buttons
Press the [FOCUS SPEED UP / DOWN] buttons to adjust the camera focus speed.
e. [PRESET SPEED UP / DOWN] Buttons
Press the [PRESET SPEED UP / DOWN] buttons to adjust the camera preset speed.
4. Custom Control Buttons
Use the Custom Control buttons to set up custom commands typically not available to the SuperJoy.
a. [CUSTOM 1 - 4] Button
The four (4) Custom buttons allow you to send custom commands to network based equipment.
Options include: HTTP Trigger, UART, TCP, UDP, & Super Presets.
5. Camera OSD Control Buttons
The Camera OSD Control section allows you to open and adjust the camera’s on screen display menu.
a. [OSD ON / OFF] Button
Press the [OSD ON / OFF] button to open and close the on screen display menu.
Move the joystick up, down, left, and right to traverse the camera’s OSD menu.
6
Rev 1.2 2/21
