System Requirements for Setup
Hardware requirements
You must have a graphic controller card with a DVI port in your
Windows/Mac (Mac is option), or SUN system. It should support
the maximum graphic resolution feature of the display to be
connected.
In case of using a computer, no special memory size, CPU
speed and chipsets are required.
Proper initial trial of the entire platform with its application using
a short length copper cable is recommended prior to install with
the optical link.
Software requirements
No special needs, if the DVI graphic controller and display
peripheral are operational with the platform’s OS and
application.
1-2 System Requirements for Setup
Welcome!
Congratulations on your purchase of the KVMX-200-TR, One (1) fiber DVI
Optical KVM Extender. This manual contains information that will assist you in
installing and operating the product.
Product Description
New One (1) fiber DVI optical KVM extender, KVMX-200-TR transmits DVI,
USB HID, PS/2, RS-232 and bi-directional stereo audio signal up to 1.0km
(3,280feet) over one (1) LC optical fiber. As an option, you can select one (1) or
two (2) fibers connection by SFP module.
Designed for high resolution performance, it guarantees lossless image quality
and no frame dropping to deliver perfect graphic data transmission up to
WUXGA (1920x1200) at 60Hz.
It provides Auto-mix EDID programming feature that reads EDID information of
both local side and remote side displays and then, detects the lowest resolution
of them. It makes the installation of KVMX-200-TR more easy and flexile at any
variable resolutions.
Figure 1
– Connection Diagram
Shipping Group of KVMX-200-TR
One (1) Transmitter (Tx) and One (1) Receiver (Rx)
Two (2) +12V/3A units (including AC cord).
User Manual
Option:
Remote console switch (LSKP-10030 & Indicator (RSKP-
1003),1RU mounting rack (OPMCR-1U),bracket (OPMCB), fiber-optic
cable
1-1 Welcome, Product Description, Shipping Group
