F-100 SR
1st
5
SPECIFICATIONS MANUAL
Detailed View
5
Detailed View
5.1
Figure 1: Detailed View of F-100 SR
No.
Name
Description
1
Scan key
By pressing this key, the scanner starts reading barcodes.
Pressing for more than 5seconds, the scanner shifts to read rate mode.
Ends by pressing key again or inputting trigger signal.
2
Status LEDs
Indicates reading result and USB communication status.
In read rate mode, the read rate is indicated by these 3-color LEDs. Refer
to section 5.2 for details.
3
Scan Window
Light paths of the imager and LED illumination. Ensure that the lens is free
from dust and dirt before scanning.
4
Mounting holes
Screw holes that can be used to mount the scanner. Screw hole is M3,
maximum depth is 4mm and tightening torque is 0.5 Nm.
④
③
①
②
