OPTICOM Vista "L"ite Series DVR, User Manual

Page: 77 / 81

77
Opticom Technologies Inc. “L” Series DVR
24. Customer’s Responsibility
This product and its components will perform reliably only when operated and
maintained in accordance with the instructions contained in this manual,
accompanying labels, and/or inserts. A defective product should not be used. Parts
which may be broken or missing or are plainly worn, distorted or contaminated should
be replaced immediately with clean, genuine replacement parts manufactured by or
available from Opticom Technologies Inc. The responsibility of Opticom
Technologies Inc for a defective product is limited by the warranty set forth in this
manual. Should repair or replacement of this product become necessary after the
warranty period, the customer should seek advice from Opticom Technologies Inc
prior to such repair or replacement. If this product is in need of repair it should not be
used until all repairs have been made and the unit is functioning properly and ready
for use. The owner of this product has sole responsibility for any malfunction
resulting from improper use or maintenance, or repair by anyone other than Opticom
Technologies Inc, and from any malfunction caused by parts that are damaged or
modified by anyone other than
Opticom Technologies Inc
25. Manufacturer’s Responsibility
Opticom Technologies Inc or its authorized representative is responsible for the effects on
safety, reliability and performance of Vista “L” Series DVR only if:
. Repairs or modifications to Opticom Technologies Inc.are made by OPTICOM
TECH authorized personnel.
The electrical installation provided for the Opticom Technologies Inc.at the
customer site complies with the appropriate local electrical regulations. For example, in Europe,
the
“Regulations for the Electrical Equipment of Buildings” published by the Institution of
Electrical Engineer shall be followed.
.
Opticom Technologies Inc.is used in accordance with the instructions for use.