http://www.hicoolopticlimate.com/
10
□ Press the <SET> again to complete the clock setting
3.8
Query (can display real time)
□
When the cycle timing (
〖
b7
〗
is set to 1), press the <SET> to display the real time.
□
Press <SET> to enter the query, then press <
△
> or <
▽
> to query the values of d1, d2, d4, d6,
and then press <SET> to exit the query.
d1: Illuminance
d2: Indoor coil temperature
d4: Indoor temperature
d6: Humidity
3.9
Parameter settings
□ Press the <SET> for 9 seconds to enter the parameter setting menu
□ Press the <ON/OFF> to select [System Function Settings Menu], [Protection Temperature
Time Menu], [Defrosting parameter] or [Password Menu]
□ Press <
△
> or <
▽
> to select the setting item in the specific menu.
□ Press <+> <-> to adjust the specific parameters.
□ Press the <SET> button to store the data and exit.
3.10 System function settings
Parameter name
Unit
number
Factory
settings
01
O0
Control method
(b0)
1(0-1)
Light control
External control
Model selection 1
(b1)
0(0-1)
Cooling and
heating
Cooling only
Model selection 2
(b2)
0(0-1)
Air-water-air
Air-air
