- 28 -
b)
Bitrate Setup
Transmission speed : Image quality and network condition
50/100/150/
200(Default)
/Best [Mbps]
It is recommended to set all encoders have same Bitrate
Apply Save & Reboot
Figure. 35 Encoder Device Setup – Bitrate Setup
c)
EDID Read/Write
Select IP address for Encoder(left) / Decoder(right) and click ‘Read’
button to load EDID information from display that has connected to the
device (Encoder: local display / Decoder: HDMI Out).
EDID information will be addressed on
Select all Encoders or desired encoder device and click ‘Write’ button.
EDID of Encoder will be changed and it will be applied after rebooting
By checking Default HDMI/DVI box, EDID can be changed instead of
reading and writing EDID from display.
Default HDMI
(4K HDMI),
Default DVI
(1080P DVI)
Figure. 36 Encoder Device Setup – EDID Setup