- 10 -
Step 8
Connect HDMI cable from IPVDS-500-D(RX) HDMI OUT port to Display. Then, connect
keyboard and mouse for remote control.
Important: IPVDS-500-D has to be connected to each of video wall displays in order. Refer
to display placement section for more detailed information.
Step 9
Connect LAN cable(CAT5e/6) from IPVDS-500-D(RX) to network switch.
Step 10
Plug +5V power adapters to both IPVDS-500-E(TX) and IPVDS-500-D(RX).
Note: Rebooting is mandatory for proper working if change of input source is needed.
5.2
Reset and Factory Reset
♦
Reset
: Device will reboot when reset button is pressed shortly
♦
Factory Reset
: Press and hold a reset button for approximately 5 seconds, then LED of
device will be turned OFF for factory reset after blinking
5.3
PC Application Installation
1)
Download
(1)
Visit Opticis website at
www.opticis.com
(2)
Click PRODUCTS > IP Video Wall / IPVDS-500-ED
(3)
Download PC program (Password :
0315
)
2)
Installation
(1)
Run setup.exe file in Windows operating system
(2)
Follow on screen instruction
(3)
Delete previous version of PC Application on the control panel of Windows OS,
before re-install or upgrade PC Application
Figure. 7 Application Installation