Optical Systems Design OSD2790SFP, Quick Start Manual

Page: 6 / 20

OPTICAL SYSTEMS DESIGN
DOC ID: 10117502
OSD2790SFP QUICK START GUIDE
PAGE 6
2.2 TECHNICAL SPECIFICATIONS
TABLE 1: TECHNICAL SPECIFICATIONS
SPECIFICATION PERFORMANCE
Electrical Data Interface
IEEE802.3z 1000Base-Lx, 1000Base-Sx
IEEE802.3u 100Base-Fx
Operating Mode
Full duplex for 100M/1G
Store-and-Forward
IEEE802.3x full-duplex flow control
Number of Optical Port
Connectors
SFP x 28: 24 for 10/1000SFPs Port1-24, 4 for the 1G uplink/trunk ports
Optical Port Connector Type SFP (LC or SC)
SFP Options
Short haul, long haul, single fiber operation, etc.
Please see OSD Datasheets #102100XX and #1021000XX for 100Mbps and
1Gbps SFP optical modules
Indicators
28 x 100M/1G Link/Activity/Speed
2 x Power
1 x Status
Configuration Connector Mini USB Console Port
Alarms
Four: Two for Power Supply Status
Two user definable via the GUI as specified in the user manual
Alarm Interface Four opto-isolated relay drivers via two 4-way 3.5mm terminal blocks
Control System Reset
Operating Temperature
-20 ° C to +75 ° C for OSD2790SFPDC
-20 ° C to +65 ° C for OSD2790SFPAC and OSD2790SFPDAC
Relative Humidity
0 to 95% non-condensing
Power Requirements
+10 to +36V
DC
@ 40VA Max for DC version
90 to 264V
AC
@ 50VA Max for standard single AC version
90 to 264V
AC
@ 55VA Max for optional redundant AC version
Power Connector
4 way 5.08mm Terminal Block for DC powered version
One IEC power inlet module for the standard AC powered version
Two IEC power inlet modules for the optional redundant AC powered version
Dimensions of Enclosure (mm)
443W x 300D x 44H
1022790SFP01