Optical Systems Design OSD2790SFP, Quick Start Manual

Page: 7 / 20

OPTICAL SYSTEMS DESIGN
DOC ID: 10117502
OSD2790SFP QUICK START GUIDE
PAGE 7
3 INSTALLATION
ELECTROMAGNETIC COMPATIBILITY
WARNING : This is a Class A product . In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
OPTICAL OUTPUT OPERATION
WARNING : Laser Safety: Class 1 Laser Product (SFP) per IEC 60825-1:2014 standard.
Class 1
The OSD2790SFP is a Class 1 laser product when SFPs
are fitted
PRECAUTIONS
▲
All service personnel should be provided training as to the hazards of direct viewing of laser
radiation and of the precautionary measures during servicing of equipment
▲
Areas where laser products are installed should be restricted in access to trained service
personnel only and appropriate warning signs posted in the work area.
▲
All laser apertures should be covered by protective covers when not connected to optical
fibers. Never leave outputs uncovered.
▲
Laser equipment should be positioned above or below eye level where possible. Apertures
should be positioned away from personnel.
▲
Protective eyewear should be worn in the vicinity of laser equipment.