OPTICAL SYSTEMS DESIGN
DOC ID: 10117502
OSD2790SFP QUICK START GUIDE
PAGE 12
1.
Connect the Console Port on OSD2790 (Mini USB) to PC with USB cable.
2.
Using HyperTerminal to set up the following parameters.
•
Baud Rate: 115200
•
Data Bits: 8
•
Parity: None
•
Stop Bits: 1
•
Flow Control: None
3.
Check the link by pressing <ENTER>. The line should jump to the next line.
4.
Using the Username and password to login the switch
•
Default Username: admin
•
Default Password: (None)
8.2
CLI COMMAND FOR IP CONFIGURATION
•
show ip interface brief
:
Display the current IP address and subnet mask.
•
configure terminal
->
interface vlan 1
->
ip address <IP address> <subnet mask>
: Setup the
switch IP address.
•
copy running-config startup- config
: Save the current configuration to start-up configuration.
PS: All configuration changes must be saved otherwise all the changes will be lost after
rebooting!
Summary of Contents for OSD2790SFP
Page 1: ...Quick Start Guide OSD2790SFP MANAGED 24 x 100M 1G SFP 4 x 1G TRUNK UPLINK SFP ETHERNET SWITCH...
Page 2: ......
Page 18: ...OPTICAL SYSTEMS DESIGN DOC ID 10117502 OSD2790SFP QUICK START GUIDE PAGE 18...
Page 19: ...OPTICAL SYSTEMS DESIGN DOC ID 10117502 OSD2790SFP QUICK START GUIDE PAGE 19...
