Optical Systems Design OSD2144A SERIES, Operator'S Manual

Page: 7 / 20

OPTICAL SYSTEMS DESIGN
DOC ID: 10109603
OSD2144A OPERATOR MANUAL
PAGE 7
1.4 OSD2144A FRONT AND REAR PANELS
There are two fixed copper ports for 10/100/1000Base-T and three optional SFP ports which can be
either copper or fiber on the front panel. The rear panel of the module version consists of a 6-way
terminal block power connector while the card version consists of a DB9 power connector which is
supplied by the OSD370 (or OSD350) chassis. A 4-Way DIP switch and micro USB connector are also
on the rear panel. Additionally there is an 8-Way DIP switch that is currently not used. Each section
will be described further throughout this manual.
FIGURE 2: OSD2144A CONNECTORS
Copper Port 1
Copper Port 2
SFP Port 5
SFP Port 4
SFP Port 3
Power Connector
8-Way Switch (Not Used)
4-Way Switch – Control
Micro USB Port