Optical Systems Design OSD2144A SERIES, Operator'S Manual

Page: 6 / 20

OPTICAL SYSTEMS DESIGN
DOC ID: 10109603
OSD2144A OPERATOR MANUAL
PAGE 6
1.3 TECHNICAL SPECIFICATIONS
TABLE 1: TECHNICAL SPECIFICATIONS
SPECIFICATION PERFORMANCE
Electrical Data Interface
IEEE802.3i 10Base-T, IEEE802.3u 100Base-T, 8023ab 1000Base-T
Electrical Data Connector RJ45 for fixed copper (ports 1 and 2) and SFP modules for port 3,4,5
Data Rates
10, 100, 1000Mbps for copper
100, 1000Mbps (dip-switch selectable) for fiber SFP modules (ports 3, 4, 5)
Operating Mode
Half or full duplex for 10/100
Full duplex for 1000
Pause frames based flow control
Ports 3, 4, 5 1000Base-Lx/Sx, 100Base-Fx, 10/100/1000Base-T
Optical Data Interface IEEE802.3z 1000Base-Lx/Sx or IEEE802.3u 100Base-Fx
Transmitter Wavelength
1310nm ±30nm for 1000Base-Lx or 100Base-Fx
850nm ±40nm for 1000Base-Sx
Transmit Optical Power
>-10dBm to –4dBm (-5dBm and +2dBm @ 1310nm and 1550nm are optional)
Receiver Sensitivity
<-21dBm
Standard Optical Link Budget
>11dB: >800m on multimode fiber @ 1310nm (Fiber bandwidth limited)
>20km on singlemode fiber @ 1310nm
>40km on singlemode fiber @ 1550nm
Optional Optical Link Budget >23dB: >100km on singlemode fiber with optional 1550nm devices
Indicators
1x Power
2x Copper Speed/Activity/Link on 2 x RJ45
2x Copper Duplex on 2x RJ45
3x SFP Speed/Activity/Link for copper or fiber
Dimensions (mm)
114W x 173D x 31H (module)
25W x 208D x 100H (card)
Weight 0.5kg (module), 0.3kg (card)
Power Requirements +8V to +35V
DC
or 22 to 28V
AC
@ 10VA (with 3x SFPs loaded)
Operating Temperature
-20
°
C to +75
°
C
Relative Humidity
0 to 95% non-condensing
Chassis Current Consumption
(CCC)
0.80 Amp when fully optioned
1022144A01