Optical Systems Design OSD2010, Operator'S Manual

Page: 8 / 16

OPTICAL SYSTEMS DESIGN
DOC ID: 10117301
OSD2010 OPERATOR MANUAL
PAGE 8
2.3
CONNECTIONS
2.3.1
POWER SUPPLY CONNECTIONS
The OSD2010 module has dual power supply inputs which requires ex10 to +36V
DC
or 22 to
28V
AC
power @ 4VA. Power should be connected to the power socket located at the back of the case.
DC power should be connected as indicated in Table 2.
TABLE 2: DC OR AC POWER CONNECTION
Power Pin Specification
Pin 1
+10V to +36V
DC
or
22V to +28V
AC
Pin 2 0V
Pin 3
+10V to +36V
DC
or
22V to +28V
AC
Pin 4 0V
FIGURE 3: OSD2010 POWER SUPPLY CONNECTIONS
2.3.2
ALARM CONNECTIONS
The alarm contact closure output on the OSD2010 can be connected to the relay coil. Maximum ratings
the OSD2010 can drive is 0.5A @ 24V
(max)
.
FIGURE 4: ALARM PINOUT
4 3 2 1
6 5 4 3 2 1