6212C Manual Version 15_22 Rev 07-19.docx
Page 4 of 53
MAINTENANCE
Lasercheck has been designed and assembled by skilled and experienced engineers and technicians. All
components used in the system operate well within their rated specifications to ensure long life and reliability of
the Lasercheck system. Electronics, lasers, and detectors are all solid-state devices and should not need to be
serviced or maintained by the user.
The controller housing is made from impact-resistant ABS and is colored black. The housing is not waterproof,
but it can be subjected to moderate rain or splash without harm.
The laser head is made of machined aluminum and plastic and all electronics and optics are secured and sealed
within the head. The head is rugged enough to withstand handling that might be normally encountered in
manufacturing shop floor gage operation. The head is also water resistant and can be subjected to moderate
rain or splash without harm.
Boards and electronics used in the system are static sensitive and easily damaged by mishandling. The
Lasercheck housing and electronics are well grounded. The head is sealed at all seams and holes to protect
components from external contaminants. The user should not open the measurement head.
If opened by non-
authorized personnel, the warranty provided by Optical Dimensions will be void.
Cleaning the Windows
The internal optics and electronics are cleaned during assembly and kept within the sealed sensor. The internal
windows at the bottom of the Lasercheck sensor cover and protect the internal sensors and laser source. They
will be exposed to outside contaminants and in very dirty environments should be cleaned at least weekly.
The windows are rugged, but care needs to be taken to not scratch them during operation or cleaning. They
should only be cleaned with ethanol, methanol, or a glass cleaner and a soft, clean paper towel, tissue, or Q-tip.
Assistance
Contact your nearest Optical Dimensions office.
