13
60% polyester and 40% cotton, you must always choose
the temperature corresponding to polyester and without
steam.
5. First classify the articles to be ironed according to the
most suitable temperature: wool with wool, cotton with
cotton, etc. as the iron heat up as fast as it cools, start
by ironing the articles requiring the lowest temperature
such as those made of synthetic fibres. Progress
towards those that require the highest temperatures.
6. Turn the temperature control until it is in front of the
appropriate signal according to the following:
· position for nylon and acetate
· · position for wool, silk or mixtures
· · · position for cotton or linen(steam)
How to fill the water tank:
1. Unplug the iron.
2. Set the steam button to “0” position.
3. Fill the tank through the filling hole.
- if you have hard water, it is advisable to use only dis-
tilled or dematerialized water.
- do not use chemically de-limed water or perfumed.
4. Do not store the iron with water in the tank.
Steam Ironing:
1. Fill the iron as described in the section ”How to fill the
water tank”
2. Plug the iron into the mains
3. Steam ironing is only possible when the higher tempera-
tures shown on the temperature control are selected
4. Wait until the pilot light goes out, which indicates that the
selected temperature has been reached.
5. Turn the steam button to the required position.
6. When the ironing is finished and during breaks in ironing,
place the iron in its upright position.
7. Disconnect the iron from the mains supply. Pour of any
remaining water and leave the iron to cool off.
Spray:
1. The spray can be used in any position, either in dry or
steam ironing, as long as the water tank is filled with
water.
2. Press the spray button for this function.
Shot of steam:
Shot of steam give extra steam for removing persistent wrin-
kles.
1. Place the temperature selector at the “max” position and
wait until the pilot light goes out.
2. Wait for a few seconds for the steam to penetrate the
fibres before pressing again.
NOTE:
for the best steam quality, do not use more than
three successive bursts each time. Several pumping actions
are needed to start this function.
Excessive use of this feature will cause the iron to cool,
ensure that the pilot light is out, before operating the shot
of steam control.
Cleaning the iron:
1. Pull out the plug and leave the soleplate to cool down.
2. Do not sue solvents or abrasive products to clean the
iron. Wipe the iron housing and soleplate with damp cloth
only, then dry.
Technische Daten:
Power: 230V~, 50Hz
Capacity: 1800W
Ecology – Environmental Protection
The “crossed-out trash bin” symbol on electrical
equipment or packaging indicates that the device
cannot be treated as general household waste
and should not be disposed of into containers for such
waste.
Obsolete or broken-down electrical device
should be
delivered to special designated collection points, organized
by local public administration, whose purpose is to collect
recyclable electrical equipment.
This way, each household helps reduce possible negative
effects influencing natural environment and allows the rec-
laiming of materials which the product is made of.
Weight: 2kg
e
ZL4118_IM_200.qxp 2009-09-22 21:59 Page 13 (Black plate)
Summary of Contents for ZL-4118
Page 9: ...9 3 0 17 dH 3 23 2 5 6 5 6 5 2 5 D 6 6 ZL4118_IM_200 qxp 2009 09 22 21 59 Page 9 Black plate...
Page 10: ...10 4 E 5 4b 9 6 6 0 0 9 3 6 3 ZL4118_IM_200 qxp 2009 09 22 21 59 Page 10 Black plate...
Page 26: ...26 ZL4118_IM_200 qxp 2009 09 22 21 59 Page 26 Black plate...
Page 27: ...27 ZL4118_IM_200 qxp 2009 09 22 21 59 Page 27 Black plate...
