12
List of prats
1. spray nozzle
2. water cover
3. water spray
4. adjustable steam button
5. indicating light
6. temperature knob
7. cord protector
8. stainless steel soleplate
9. Anti-heating soleplate
10. back cover
11. power cord
12. handle
13. water later-max
14. burst of steam
IMPORTANT SAFEGUARDS:
When using your iron, basic safety precautions should
always be followed, including the following:
Read all instructions before using:
1. Use the iron only for its intended use.
2. To protect against the risk of electric shock, do not
immerse the iron in water or other liquids.
3. The iron should always be turned to the lowest position
before plugging or unplugging from the mains outlet.
Never pull the cord to disconnect from the mains:
instead, grasp plug and pull to disconnect.
4. Do not allow the cord to touch hot surfaces. Allow the
iron to cool completely before putting away.
5. Always disconnect the iron from the electrical outlet
when filling with water or emptying and when not in use
6. Do not operate the iron with a damaged cord or if the
iron has been dropped or damaged. To avoid the risk of
electric shock, do not disassemble the iron. Take it to a
qualified service agent for examination and repair.
Incorrect re-assembly, can cause a risk of electric shock
when the iron is used.
7. Close supervision is necessary for any appliance being
used by or near children. Do not leave the iron unat-
tended when connected to the mains or on an ironing
board.
8. Burns can occur from torching hot metal parts, hot
water or steam, use caution when you turn a steam iron
upside down, there may be hot water in the reservoir.
9. If the iron is not operating normally, disconnect from the
power supply. And contact the nearest authorized serv-
ice agent.
10. Your iron is designed to rest on the heel. Do not leave
the iron unattended when switched on. Do not place the
iron on an unprotected surface even if it is on its heel rest.
11. If the supply cord is damaged, it must be replaced by
the manufacturer or its service agent or a similarly qual-
ified person in order to avoid a hazard.
Suggestions before using the iron for the first time:
1. Check that the voltage on the product rating plate coin-
cides with your mains voltage.
2. Certain parts of the iron have been lightly greased there-
fore the ion could give off a little smoke when plugged in
for the first time. This will cease after a short while
3. Before using the iron for the first time. Remove the plas-
tic protector from the base(if it has one) clean the base
with a soft cloth
4. Keep the base very smooth. Do not run it over metal
objects(such as against the ironing board, buttons, zips.
etc.)
5. Pure wool fibres (100% wool) can be ironed with the
appliance in the steam position by preference, select a
high steam position and use a dry ironing cloth.
Selecting the temperature:
1. Check the ironing instruction on the garment to be
ironed.
2. If the garment does not have any ironing instruction but
you know the kind of fabric in question, use the chart
below.
3. Fabrics that have some kind of finish (polishing, wrin-
kles, contrasts…) can be ironed at the lowest tempera-
tures.
4. If the fabric contains several kinds of fibres, always
select temperature applicable, if an article contains
STEAM IRON ZL-4118
INSTRUCTION
UK
ZL4118_IM_200.qxp 2009-09-22 21:59 Page 12 (Black plate)
Summary of Contents for ZL-4118
Page 9: ...9 3 0 17 dH 3 23 2 5 6 5 6 5 2 5 D 6 6 ZL4118_IM_200 qxp 2009 09 22 21 59 Page 9 Black plate...
Page 10: ...10 4 E 5 4b 9 6 6 0 0 9 3 6 3 ZL4118_IM_200 qxp 2009 09 22 21 59 Page 10 Black plate...
Page 26: ...26 ZL4118_IM_200 qxp 2009 09 22 21 59 Page 26 Black plate...
Page 27: ...27 ZL4118_IM_200 qxp 2009 09 22 21 59 Page 27 Black plate...
